Marine operations software and offshore installation

Risk management of marine operations and offshore installation

Marine operations with 3D simulation and visualization

Sesam's modules Sima, Simo and Riflex let you visually simulate, test and evaluate marine operations ahead of offshore handling. These modules allow you to significantly reduce risk for transportation, installation and lifting of fixed and floating structures, and installation of subsea equipment.

What you get with Sesam's integrated set of tools

Model and visualize operations ahead of time in 3D simulation
Run multiple ‘what-if’ scenarios
Shows results of all known factors, including dynamic positioning
Coupled and multi-body analysis is performed in time domain
Integrated post-processor and results presentation

Reducing risk during marine operations

Marine offshore operations can involve unpredictable and unforeseen complexities. By analysing multiple possible scenarios and simulating operations in 3D and real time, you can base critical decisions on the best available information. The benefits of using Sesam can be crucial for successful completion of offshore installations.

With Sesam's software tool set you can

Manage risk of marine operations
Perform ‘what-if’ analyses and improve HSE performance
Evaluate feasibility and gain better understanding of main challenges
Prepare for actual operation through familiarization
Support decision-making during actual operation
Analyse based on 3rd-order Runge-Kutta and Newmark-β methods, among others

Sesam for marine systems can be used for

Lifting of topsides and modules
Lifting and installation of SURF structures (templates, pipelines, flexible risers)
Float-over installation/removal of topsides
Load-out from quay to barge
Offloading (tankers in tandem or side-by-side)
Offshore crane operations
Jacket lift installation and removal
Transportation of offshore floaters (e.g. TLP, semi-submersible, spar)
Up-ending of spar, and towing platforms by tugs (e.g. GBS)

All analysis is performed through a user-friendly graphic interface (module Sima) proving modelling and post-processing functionality, with static and dynamic time domain calculations done using the modules Simo and Riflex.

One common tool for all marine systems including those for floating offshore wind turbine (OWT) structures

Our marine systems tools are also well suited to analyze the hydrodynamic motions and mooring response of floating systems used to support wind turbines.

추가 정보